MILD STEEL WELDED PIPES & TUBES

Dimensions	IS, ASTM, ASME and API
Pipe Grade	IS 1239 PART I IS 3589 Fe 330 / Fe 410 IS3601 IS 4923 YST 210 / 240 / 310 (HOLLOW SECTION – SHS / RHS) API5L GR. B ASTM A / ASME SA 53 GR. B
Tube Grade	BS3059 GR. 360 PART II DIN 2393 / ST34.2
Size	15mm NB to 150mm NB (1/2” to 6”) 168.3mm OD to 2540mm OD 25MM X 25MM TO 150MM X 150MM (SHS) 50MM X 25MM TO 172MM X 92MM (RHS)
Tubing Size	Sizes (Seamless) 1/2" OD – 3” OD
Specialized in	Large Diameter Size
Form	Round, Square, Rectangular, Hydraulic Etc
Length	4-7m R/L, 6 m, 12 m or as per client requirement
End	Plain End, Beveled End, Threaded End, Screwed with Socketed

Rahil Metal is one of the leading Supplier and Exporter of Mild Steel Pipes & Tubes that is being made up from High Quality of Standard Raw Materials. Mild steel Pipes, also recognized as plain-carbon steel, is at the moment called as the most general form of steel, for the reason that its cost is comparatively low, but at the same time it offers material characteristics that are being good enough for a lot of applications. These MS Pipes have a moderately low tensile potency, but it is quite not expensive and trouble-free to form, whereas surface hardness of the same can be increased all the way through carburizing. Our pipes are time and again used when large amount of steel quantities are required, for a case in point as structural steel. Mild Steel Tubes are supplier by using low carbon steel, which would be in the range of less than 0.25 percent. However, due to low carbon content in these tubes, they do not become firm and are quite simple to use